by Adhesive Supply | Mar 24, 2026 | Adhesive Advice & Technical Guides
Choosing the right structural adhesive can be confusing, especially when deciding between epoxy, MMA (methacrylate), and polyurethane. Each type has different strengths, cure speeds, flexibility, and surface compatibility, so selecting the wrong one can lead to weak...
by Adhesive Supply | Mar 19, 2026 | Adhesive Advice & Technical Guides
Best Adhesive for Plastic to Plastic Bonding Bonding plastic to plastic can be surprisingly difficult. Different plastics behave very differently, and an adhesive that works perfectly on one type may completely fail on another. Choosing the best adhesive for plastic...
by Adhesive Supply | Mar 19, 2026 | Rubber & Foam Materials
What’s the Difference Between EPDM and Neoprene Sponge Rubber? Choosing between EPDM vs neoprene sponge rubber can be confusing, especially as both materials look similar and are commonly used for sealing, gasketing, insulation and weatherproofing. However, their...
by Adhesive Supply | Mar 16, 2026 | Adhesive Advice & Technical Guides
When choosing the best adhesive for waterproof sealing, it’s important to select a product that provides both strong bonding and long-term resistance to water, weather, and temperature changes. Not all adhesives are designed to seal against moisture, and using the...
by Adhesive Supply | Mar 11, 2026 | Rubber & Foam Materials
Choosing the best rubber for gaskets is essential for achieving reliable sealing, long service life and resistance to environmental conditions. Different rubber materials behave very differently depending on temperature, oil exposure, weathering and compression, so...
by Adhesive Supply | Mar 8, 2026 | Rubber & Foam Materials
Choosing the correct rubber sheet thickness is essential for sealing, gasketing, vibration control and protection applications. Using material that is too thin can lead to leaks or premature wear, while material that is too thick may not compress correctly or may be...
by Adhesive Supply | Mar 7, 2026 | Rubber & Foam Materials
This rubber sheet guide explains the differences between EPDM, neoprene, nitrile, SBR, sponge rubber and polyethylene foam materials. Choosing the correct rubber material is essential for sealing, gasketing, vibration control, waterproofing and industrial protection....
by Adhesive Supply | Mar 3, 2026 | Adhesive Advice & Technical Guides
Adhesives are more than just “which glue is strongest.”When selecting the right product for construction, roofing, manufacturing or industrial applications, understanding the adhesive technology behind the product is essential. Different adhesive chemistries behave in...
by Adhesive Supply | Mar 2, 2026 | Adhesive Advice & Technical Guides
Bonding aluminium to plywood is a common requirement in construction, vehicle conversions, shopfitting, marine interiors and signage. The challenge is that you are joining two very different materials. Aluminium is smooth, non-porous and rigid. Plywood is porous,...
by Adhesive Supply | Feb 25, 2026 | Adhesives & Sealants
When you need a single product that can both bond and seal across multiple substrates, few options are as versatile as HB42 Ultimate Sealant & Adhesive. Used across construction, fit-out, signage and general building applications, this hybrid polymer adhesive...
