Description
Permabond 105 Cyanoacrylate Adhesive – Fast Bonding Super Glue for Rubber, EPDM & Plastics
Permabond 105 is a low viscosity, high purity cyanoacrylate adhesive engineered for fast, high-strength bonding of rubber, plastics and precision components. For fast bonding of rubber, EPDM and plastics, Permabond 105 cyanoacrylate adhesive offers excellent instant grab and clean application.
Designed for industrial and engineering use, this fast-curing super glue achieves handling strength in seconds, making it ideal for rubber bonding, gasket repair and small component assembly where speed and accuracy are critical.
Permabond 105 is particularly effective on difficult rubber materials including EPDM, butyl and natural rubber, as well as plastics such as PVC, ABS and phenolic. Its thin, free-flowing consistency allows it to penetrate tight joints and bond close-fitting parts with minimal adhesive.
As a single component, solvent-free adhesive, it requires no mixing or heat curing, making it ideal for production lines, maintenance work and workshop use.
Where is Permabond 105 used?
- Bonding EPDM rubber seals
- Plastic trims and housings
- Small metal components
- Fast repairs where clamping isn’t possible
✅ Key Benefits
✔ Fast curing cyanoacrylate (super glue) – bonds in seconds
✔ Excellent adhesion to rubber, EPDM, butyl & plastics
✔ Low viscosity – ideal for precision parts & tight tolerances
✔ High strength bonds on metal, PVC, ABS & engineering plastics
✔ Single component – no mixing or heat required
✔ Solvent-free for clean, reliable application
✔ Ideal for production, repair & assembly applications
🏗 Typical Applications
- Rubber bonding & gasket repair (EPDM, nitrile, butyl)
- Bonding plastic components & housings
- Automotive trim, seals & small parts
- Precision engineering assemblies
- Electronics and component bonding
- Maintenance, repair and workshop use
- Fast bonding on production lines
⚠️ Important Notes
- Best for close-fitting parts (max gap ~0.1mm)
- Not suitable for gap filling or flexible joints
- For PE, PP or PTFE, use a Permabond primer (POP)
- For porous or difficult surfaces, use activator for faster cure
🔬 Technical Overview
- Type: Ethyl cyanoacrylate
- Viscosity: Low (30–50 mPa.s)
- Fixture Time: ~5–20 seconds
- Full Cure: 24 hours
- Max Gap Fill: ~0.1mm
- Temperature Range: down to -55°C
- Colour: Clear
🎯 Where Permabond 105 Fits
Use Permabond 105 when you need:
- ⚡ Fast bonding in seconds
- 🎯 Precision application
- 🧩 Small or tight-fitting parts
👉 If you need:
- Gap filling → use epoxy
- Flexible bonding → use hybrid or PU
- Large surface bonding → use contact adhesive
Reviews
There are no reviews yet.