by Adhesive Supply | Apr 8, 2026 | Adhesive Advice & Technical Guides
When searching for the strongest glue for plastic, it’s easy to assume there’s a single product that works for every situation. In reality, plastic bonding depends heavily on the type of plastic, the environment, and the strength required. Some plastics are easy to...
by Adhesive Supply | Apr 6, 2026 | Adhesive Advice & Technical Guides
Carbon fibre is one of the strongest and lightest materials used in modern engineering, but bonding it correctly requires the right adhesive system. Because carbon fibre cannot be welded and drilling can weaken the structure, adhesives are often the preferred method...
by Adhesive Supply | Apr 3, 2026 | Adhesive Advice & Technical Guides
Finding the strongest glue for metal to plastic isn’t just about grabbing the highest strength adhesive on paper. Metal and plastic behave very differently. One is rigid and conductive, the other can be flexible, chemically resistant, or even “non-stick” by nature....
by Adhesive Supply | Mar 31, 2026 | Adhesive Advice & Technical Guides
Why Aluminium to Wood Bonding is Challenging Choosing the best adhesive for aluminium to wood (exterior use) is important because these materials behave very differently. Aluminium expands and contracts with temperature Wood absorbs moisture and moves over time...
by Adhesive Supply | Mar 25, 2026 | Rubber & Foam Materials
When machinery, equipment, HVAC units, or structural components create unwanted movement, using the best rubber for vibration pads is essential to reduce noise, absorb shock, and protect surrounding materials. Anti-vibration mounts are widely used in construction,...
by Adhesive Supply | Mar 24, 2026 | Adhesive Advice & Technical Guides
Choosing the right structural adhesive can be confusing, especially when deciding between epoxy, MMA (methacrylate), and polyurethane. Each type has different strengths, cure speeds, flexibility, and surface compatibility, so selecting the wrong one can lead to weak...
by Adhesive Supply | Mar 19, 2026 | Adhesive Advice & Technical Guides
Best Adhesive for Plastic to Plastic Bonding Bonding plastic to plastic can be surprisingly difficult. Different plastics behave very differently, and an adhesive that works perfectly on one type may completely fail on another. Choosing the best adhesive for plastic...
by Adhesive Supply | Mar 19, 2026 | Rubber & Foam Materials
What’s the Difference Between EPDM and Neoprene Sponge Rubber? Choosing between EPDM vs neoprene sponge rubber can be confusing, especially as both materials look similar and are commonly used for sealing, gasketing, insulation and weatherproofing. However, their...
by Adhesive Supply | Mar 16, 2026 | Adhesive Advice & Technical Guides
When choosing the best adhesive for waterproof sealing, it’s important to select a product that provides both strong bonding and long-term resistance to water, weather, and temperature changes. Not all adhesives are designed to seal against moisture, and using the...
by Adhesive Supply | Mar 11, 2026 | Rubber & Foam Materials
Choosing the best rubber for gaskets is essential for achieving reliable sealing, long service life and resistance to environmental conditions. Different rubber materials behave very differently depending on temperature, oil exposure, weathering and compression, so...
